VNM Motion Controlle

VNM Motion ControlleFeatures: The anodized Aluminum box reduces noise from other devices. Isolates the micro controller from all servo drivers to reduce EMI with optocoupler and digital isolator. Supports up to 9 servos with pulse frequency up to 500khz (both are configurable). The accurary of pulse generation is almost absolute (see the picture with 100 milions pulse, no pulse is lost). Generates exactly the number of pulses that the driver needs so the pulse resolution

Features:

• The anodized Aluminum box reduces noise from other devices.

• Isolates the micro controller from all servo drivers to reduce EMI with optocoupler and digital isolator.

• Supports up to 9 servos with pulse frequency up to 500khz (both are configurable).

• The accurary of pulse generation is almost absolute (see the picture with 100 milions pulse, no pulse is lost).

• Generates exactly the number of pulses that the driver needs so the pulse resolution is very high and smooth movement.

• Automatically correct the position of the actuator in case the servo driver loses pulse when the actuator reaches the limit.

• Supports up to 2 belt tensioners without belt tensioner feature on a motion software.

• Configure parameters/Monitoring system state via VNM Config UI.

• The control loop is 1 ms that is realtime with a motion application.

• Filtering feature to make the actuators run smoothly in VNM Config UI.

• Unlimit baurate that mean can run at any speed that a motion software supports.

Work with:

• FlyPT Mover

• Sim-motion

• Simtools

• SRS