Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 13 - Jul 18
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Ella Classic 48 in. W x 37 in. D x 80 in. H 1-Piece Low Threshold Shower Stall in Biscuit with Grab Bars, Right-Hand Seat, Center DrainElla 48x37x80 1 piece low threshold shower stall, RHS seat, center drain One piece low threshold shower designed for easy entry and a clean, seamless look. Durable AcrylX applied acrylic over ArmorCore reinforcement delivers a high gloss, easy to clean surface with long lasting strength. Features a right hand molded seat, center drain, and integrated shelves for practical storage. Key Features: One Piece Construction: Seamless walls with integral
Ella 48x37x80 1-piece low-threshold shower stall, RHS seat, center drain
One-piece low-threshold shower designed for easy entry and a clean, seamless look. Durable AcrylX applied acrylic over ArmorCore reinforcement delivers a high-gloss, easy-to-clean surface with long-lasting strength. Features a right-hand molded seat, center drain, and integrated shelves for practical storage.
Key Features:
- One-Piece Construction: Seamless walls with integral base—no grouting required
- Durable AcrylX Surface: High-gloss, low-porosity finish resists scratches, cracks, and fading
- ArmorCore Reinforcement: Engineered to withstand heavy loads without cracking
- Safety & Comfort: Low 4 in. threshold, slip-resistant floor, and right-hand molded seat
- Built-In Storage: Integrated corner shelves plus molded soap/foot ledge
Please check the Product Data Sheet Here
Specifications Table:
| Specification | Details |
|---|---|
| Overall Dimensions (WxDxH) | 48 in. x 37 in. x 80 in. |
| Configuration | 1-piece shower stall with integral base |
| Threshold Height | 4 in. |
| Drain Location | Center |
| Seat Orientation | Right-hand molded seat |
| Wall Texture/Pattern | 6 in. tile pattern with diamond accent row |
| Material | AcrylX applied acrylic with ArmorCore reinforcement (fiberglass) |
| Surface Type | Smooth, high-gloss |
| Floor Surface | Slip-resistant, textured |
| Number of Shelves | 2 corner shelves plus molded soap/foot ledge |
| Number of Shower Pieces | 1 piece |
| Included Components | 2 in. chrome strainer brass drain with friction seal |
| Installation Type | Direct-to-stud, alcove |
| Fits Finished Width | 48 in. |
| Wall Height | 80 in. |
| Base Length | 48 in. |
| Base Width | 37 in. |
| Base/Threshold Height | 4 in. |
| Number of Finished Sides | 3 |
| Shower Kit Type | Base & wall |
| Certifications and Listings | ICC-ES PMG Listed; meets or exceeds UPC, IPC, ANSI Z124.1, NAHB, HUD, FHA |
| Manufacturer Warranty | Lifetime Limited Residential; 30-Year Commercial |
Frequently Asked Questions (FAQ):
Q: Can this 1-piece shower be used for remodels?
A: It’s commonly intended for new construction; verify it can pass through all doorways and halls before ordering.
Q: What is the drain location?
A: Center drain only; left or right-side drain options are not available.
Q: What are the overall dimensions?
A: Approximately 48 in. W x 37 in. D x 80 in. H with a 4 in. threshold.
Q: What material is it made from?
A: AcrylX applied acrylic over fiberglass/ArmorCore reinforcement.
Q: Is a shower door compatible?
A: Yes—door-friendly opening; refer to the specification drawing for door sizing.
Sculpted Serenity for a Spa-Worthy Shower
This one-piece stall brings a tailored, architectural quiet to the bath—sleek planes, a diamond accent band, and a luminous high-gloss finish. The right-hand molded seat is a graceful curve that doubles as a sculptural moment. Pair it with matte black fixtures and a clear glass door to let the tile-texture pattern shine. It’s an elegant foundation for everyday luxury and easy living.
Upgrade your bath with this durable, low-threshold Ella shower—order now to combine safety, style, and easy maintenance in one clean install.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.9 ★★★★★
Based on 148 reviews
Sort
Product Reviews
★★★★★ 5
Very good product at a fair price
Model: SLH20025
Very good sound deadener and heat shield, it is a bit sticky to work with, but easy to shape and cut
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 19, 2026
★★★★★ 5
I wish I had Siless 20 years ago!!!
Model: SLH20025, Model: SLH20025
I have installed all kinds of insulation in vehicles over many years. I only needed to purchase 2 boxes to complete the entire interior siding of my 2025 chevy express, what a great value! I wanted to insulate my locksmith van for sound and heat. The sound reduction virtually eliminated the road noise. These panels also look amazing. It got up to 110F in the sun with the doors closed. After adding Siless insulation the temperature maxed out at 97F. That is a massive difference. Plus, I didn't even finish with the roof before testing. Siless Hybrid 3in1 was extremely easy to cut and adhere onto metal panels. I'm impressed with the quality of the individual panels and the adhesive is not toxic smelling compared to some others. My favorite thing about these panels is you can actually take them off and readjust them before they finally stick and they do not leave any black residue behind when you pull them up to adjust them. All I needed was a heat gun, knife and a roller to complete this job. The size of each panel is perfect, you can handle them with ease. I probably won't need your product again for a while, but when I do I will definitely be back.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 21, 2025
★★★★★ 5
Works well and is easy to install.
Model: SLH20025, Model: SLH20025
I was sound and heat insulating a generator bay in my class A RV so I did three tests before and during material application: I did a sound level test to see how effective the material was for my application, a "stickiness" test, and a flammability test. This was indoors on a dry 78°F day. From beginning to end, the entire process, including testing, took 5 hours to install 25 sqft or material in a very complex area. One hour for cleaning, 3 hours for installation, and 1 hour for test setup and testing.
Using a sound meter, I took before and after readings and determined that I reduced the sound level by 2.2 db (40% energy decrease) with a noticeable decrease in sound and frequency. The generator bay is located under the master bedroom in the aft portion of the coach. The sound went from a rattling, vibrating generator noise to a more tolerable low level rumble.
The material was easy to apply. I did some testing prior to application and determined that surface preparation is key. I cleaned my painted metal surface and then degreased with acetone and the material stuck well. Be careful and purposeful when you apply the material because once it was stuck to the metal, it was quite difficult to remove or reposition.
Since it was going to be installed into a gasoline powered generator bay located under our sleeping quarters, I did some flame testing to determine the level of risk. Although not highly flammable after installation, my testing revealed that the PE used will catch on fire under certain circumstances. In order to reduce the risk, I used aluminized duct tape to ensure that all the edges were sealed and the PE was not exposed to direct flame in the event of a fire. I also decided to install an automatic fire extinguisher as an added precaution. In all fairness there should be one installed in the generator bay anyway.
All in all, I am very satisfied with the product and the results. I have recommended this product to my other RV owner friends.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 13, 2025
★★★★★ 5
Great product. Best value i could find
Model: SLH20025
I'm using talk to text, so forgive any grammatical and spelling errors.
I ordered this product after doing a bit of research on sound dampening materials. I had been doing car stereo for quite some time since my teens. Itook a break for 20 years or so. I'm now 40 and back in the day there was dynamat. And that was about it. as irecently bought a new 2017 F350 crew cab. I wanted to put in a new stereo system and being that it was my dream truck. I was going to put in my dream stereo. But before I could do that, I needed to start with the sound deadening. I looked into today's leading product and found a company called resonx. Had taken their place as king of the hill in sound deadly. I researched their products and found the materials they were built from and Silas was the closest match at the best price I used Silas Max. First, then Silas 3 and 1 hybrid over that on all exterior panels. Then, on the interior panels. I used the 3 and 1 hybrid . on the floor I used Silas Max. Then, the 3 and 1 hybrid, then Silas liner over that the car is incredibly quiet . As far as sound dampening and deadening, it works very well for the money really can't beat it. Do your homework no How and where to apply it? And you really can't go wrong or about $400. I did. What would have cost me easily? Two thousand in other brands highly recommend the product prep work.Is everything do your homework?Do it right and you will be happy with this stuff
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 6, 2026
★★★★★ 4
Not simple, nor easy
Model: SLH20025
I wanted to add sound proof material to the bare metal areas on the floor of my Toyota Tundra. The area behind the front seats had a haphazard application of sound deadening material. There were several complications to the project which may come up in other vehicles.
First is the floor covering which had plastic pillars underneath to support any weight on the cover. The sound deadening material had to be cut out so these pillars would rest on the bare metal of the floor. This required a lot of cutting with a utility knife and at times heavy scissors. The instructions say to make a template before cutting the material and I did this for the driver's side. This doubled the amount of time needed to install it. On the passenger's side I laid the rectangles of material with the backing on and pressed the floor covering onto the material. This showed where the support pillars were, which I then cut out.
Second is peeling the backing off the material. This can be very difficult as the adhesive sticks to it. The backing came off in multiple pieces and sometimes took 5 minutes for one piece. They say to wear gloves when handling the material but this is impossible when trying to get the backing off.
Third is pressing the material onto the metal. The instructions say to use a roller, but this was impossible for the irregular surface I was working on. The hand is the best tool to press the material on.
The material seems to be of high quality and I expect it will reduce the road noise in the cab.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2025
recommand products
I.W. Tremont CT5-126 Extraction thimbles Cellulose Fast Flow Format: 31x205 mm (Inner diameter x Height) pack of 25
192.85
I.W. Tremont IWT-ES10500 PTFE inline membrane filter, 50mm dia, porosity 0.22µm, STERILE filter with 1/4" to 3/8” barb ports, 10 pack
197.01
Ahlstrom 0950-1100 Hardened Quantitative Filter Paper, Grade 95, 110 mm, 100/pk
31.93
I.W. Tremont GT9-111 Extraction thimbles glass microfibers, Format 28x60 mm (Inner diameter x Height) pack of 25
190.85
I.W. Tremont GT9-109 Extraction thimbles glass microfibers, Format 27x 80 mm (Inner diameter x Height) pack of 25
190.85