Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 13 - Jul 18
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Flexco Conductive Tile White/Gray 24-in x 24-in Vinyl Tile Flooring (9-sq ft)Flexco Conductive Vinyl Tile, White Gray, 24 in x 24 in Conductive vinyl tile engineered for controlled environments. This 24 in x 24 in glue down tile delivers low maintenance performance and durability for data centers, clean rooms, and healthcare spaces. Key Features: Conductive Performance: Designed for controlled environments where static control is critical. Low Maintenance: No finish required and easy to clean for reduced upkeep. Seamless
Flexco Conductive Vinyl Tile, White/Gray, 24-in x 24-in
Conductive vinyl tile engineered for controlled environments. This 24-in x 24-in glue-down tile delivers low-maintenance performance and durability for data centers, clean rooms, and healthcare spaces.
Key Features:
- Conductive Performance: Designed for controlled environments where static control is critical.
- Low Maintenance: No finish required and easy to clean for reduced upkeep.
- Seamless Installation: Can be heat-welded and glue-down installed for a continuous surface.
- Durable Construction: Tough enough for heavy traffic with a dry-back backing and straight edges.
- Hygienic Surface: Naturally resists bacteria and fungi per ASTM G21; for indoor use.
Specifications Table:
| Specification | Details |
|---|---|
| Series Name | Conductive Tile |
| Color/Finish Family | White |
| Manufacturer Color/Finish | White/Gray |
| Pattern | Speckle |
| Tile Size | 24-in x 24-in |
| Actual Length (Inches) | 36 |
| Actual Width (Inches) | 36 |
| Actual Thickness (Millimeters) | 3.175 |
| Thickness Measurement | 3-mm |
| Wear Layer Thickness (Mils) | 0 |
| Square Footage Per Piece | 9 |
| Square Footage Per Carton | 9 |
| Pieces per Carton | 1 |
| Installation Type | Glue down |
| Edge Type | Straight edge |
| Backing | Dry Back |
| Construction Type | VT |
| Luxury Vinyl Tile | No |
| Groutable | No |
| Floating | No |
| Self-Adhesive | No |
| Protective Wear Layer | Vinyl |
| Gloss Level | Medium |
| Scratch Resistant | No |
| Stain Resistant | No |
| Textured | No |
| Commercial/Residential | Commercial/Residential |
| Use Location | Indoor |
| Sub Floor Surface | Wood or concrete |
| For Use Over Concrete | Yes |
| For Use Over Wood | Yes |
| For Use Over Tile | No |
| For Use Over Vinyl | No |
| For Use Over Cork Underlayment | Yes |
| Style | Traditional |
| Warranty | 1-year limited |
| Wear Layer Durability | Light traffic (0-5.9 mils) |
| Color Shade | Light |
| UNSPSC | 30161700 |
| CA Residents: Prop 65 Warning(s) | No |
Frequently Asked Questions (FAQ):
Q: What is the tile size and coverage?
A: Each tile measures 24 in x 24 in and covers 9 sq ft per piece.
Q: How is this tile installed?
A: Glue-down installation; tiles may be heat-welded for seamless results. Refer to Flexco’s adhesive recommendations.
Q: Is it suitable for high-traffic commercial spaces?
A: Yes. It is built for heavy traffic and commonly used in data centers, clean rooms, and healthcare facilities.
Q: Is a finish required after installation?
A: No. The tile is low maintenance and does not require additional finishes.
Q: Where can it be used?
A: Indoor use only over approved subfloors such as wood or concrete.
Clean, Controlled, and Quietly Luxe
This crisp white-and-gray speckled tile brings a refined, clinical calm to any performance-driven space. The seamless heat-weld option creates a sleek, uninterrupted plane that feels both modern and meticulously tailored. Pair it with brushed stainless fixtures and matte white walls for a gallery-clean aesthetic. It’s a smart foundation for spaces where elegance meets exacting function.
Choose Flexco’s conductive tile for a seamless, low-maintenance floor that elevates performance and style in controlled environments.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.3 ★★★★★
Based on 1153 reviews
Sort
Product Reviews
★★★★★ 5
Creality K1 SE - Prints great with stock settings - needs a side spool mount
Set name: K2 SE, Set name: K2 SE
I bought the Creality K1 SE a little over a week ago. I had an Ender 3 S1 before this printer. The K1 SE is so, so much easier to print with right out of the box! I definitely recommend it. It's a good way to get the improvements that were built into Creality's K1C, but at a nicer price. Plus, you can install your own version of Klipper if you want.
I've printed 10 or so things in PLA and PETG, and I haven't had any failed prints. The automatic bed leveling has just worked. I have not had any problems with bed adhesion. On the Ender 3 S1, I only used a textured PEI plate, but the smooth build plate on the K1 SE works fine. The extruder cooling fan also seems ok for what I've printed so far. I printed an overhang test and the 75 degree overhang looks fine, but it had trouble at 80 degrees. The bridging test looked ok. (The longest bridge was only 25 mm on that test however.)
I've put the printer in a soft-sided enclosure that I had used for my old Ender 3 S1. (It's easy to find similar encolsures.) The LEDs on the K1 SE are bright enough to see inside which is something that I was concerned about before I purchased. However, this enclosure makes it difficult to access the back of the printer where the filament spool is mounted, so I designed a mount that clamps onto the side-bar - see the pictures. The files are on Printables - "Creality K1 SE Side Spool Mount".
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 21, 2025
★★★★★ 3
Almost Good
Set name: K2 SE
The nozzle cleaning is completely ineffective. The wiper pushes material up the sides of the nozzle and melts onto the nozzle. The result is the nozzle leaves burnt debris on the prints. The calibration before each print only probes 5 points on the bed and the results are not satisfactory, with the nozzle being variously too close or too far from the bed. To adjust the z offset you have to go through several menus and the machine seems to not remember where you set it last time. Print quality is good except for VFAs. Part cooling fan is very loud at full speed.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 5, 2026
★★★★★ 5
Assembly Tricks And Tips.
Color: Dark Grey, Size: 5 Seat
All my packages came at same time. Assembly is in 3 phases, each box had the same complete instruction book, but each phase was not completely together in the same box. I immediately started opening boxes and just separated by letters. A's here, B's here. Not all A's or the other letters are the same, but it is very easy to follow the instructions. You won't get it mixed up. 3 hardware kits, it's pretty easy. Picture Book Difficulty :) The one large headboard piece was Letter M. There was no sticker on it, but there were no M stickers either. Pretty easy.
It's not a thick grandma's pull-out bed type of couch, but seems sturdy. I probably should have got the 3 year warranty, and I only have one kid. This isn't a couch to front-flip off the island on to, but it is nice and comfy and seems to be worth the cost. Assembly took about 2-3 hours casually I think. I used impact drill. Luckily it's 1 screw head size, then the socket for the nuts basically (provided). Communication with seller was easy and transparent. Idk what else people might be looking for in these reviews. It smelled completely fine. Good purchase. They say to air it out for a while, but I just assembled it immediately it didn't mess up anything.
OH! And a little trick for the double sided threaded bolts with no head, they can get stuck hand tightening it so tighten down one of the nuts all the way to the end of the exposed thread that sticks up, and you can thread those bolts that don't have a head WAY easier using the nut as the head. Then just loosen the nut back off of it. You'll understand what I mean. Thank You
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 28, 2026
★★★★★ 5
Would buy again!!!
Color: Dark Grey, Size: 7 Seat
⭐️⭐️⭐️⭐️⭐️ Perfect Couch for Comfort, Space, and Style!
I couldn’t be happier with my purchase of the SUAWY 108 Inch Sectional Sleeper. From the moment it arrived, I knew I made the right choice. Setup was straightforward, and the couch feels incredibly sturdy and well-built. The fabric is soft to the touch yet durable enough to handle everyday use, which is perfect for both lounging and having guests over.
The size is exactly what I was looking for — spacious enough to seat a large group comfortably without feeling cramped. Whether I’m relaxing after work, having friends over, or stretching out for a nap, it provides more than enough room. The chaise and sleeper function are real game changers. The pull-out sleeper is surprisingly supportive and comfortable — not at all like the thin, saggy mattresses I’ve experienced with other sofa beds. My guests have all commented on how well they slept!
I also love the storage space built into the sectional. It’s so convenient for keeping extra blankets, pillows, or even board games tucked away neatly. This design makes it feel like the couch was made with real-life use in mind, not just looks.
Speaking of looks, the style is modern and clean, and it blends perfectly into my living room. The neutral tone makes it easy to decorate around, and it honestly makes the whole room look more put-together.
Overall, this sectional sleeper has completely exceeded my expectations. It’s comfortable, practical, stylish, and worth every penny. If you’re on the fence, don’t hesitate — this is absolutely one of the best furniture investments I’ve made. I’m genuinely so happy every time I sit down on it, and I highly recommend it to anyone looking for a large, versatile sectional.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 8, 2025
★★★★★ 4
An okay sectional
Color: Dark Grey, Size: 5 Seat, Color: Dark Grey, Size: 5 Seat
I want to give my honest review of this couch. One significant difference in the actual couch vs the photos here is the back of the couch is actually much thinner than in the photos. It’s made with metal framing that is very thin covered in fabric with no sort of padding. Also, the back of the couch does not angle back far. Which makes the couch pretty uncomfortable, as your back is up at almost a 90 degree angle.
The quality of the couch overall is good. It was easy to assemble and I didn’t really run into any issues in that regard.
Like others have said. The cushions are quite thin and also not super soft. The couch is also quite low to the ground, so if you’re looking for that oversized super soft couch, this probably isn’t the one.
I do love the pull out bed/chaise which is super nice, ans the storage is great too. For the cost of the couch I think the quality and comfort are good.
I don’t love it, I don’t hate it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 8, 2026
recommand products
Moen Lindor Brushed Nickel Pivot Toilet Paper Holder
22.06
Allied Brass Waverly Place Collection 24-in Train Rack Towel Shelf in Brushed Bronze
165.82
Kenney 3-Tier Stainless Steel Spring Tension Shower Corner Pole Caddy with Four Clip-on Hooks and Razor Holders, Satin Nickel
39.99
Pfister Ashfield Rustic Bronze Wall Mount Towel Ring
50.51
20-Nozzle Max Coverage Adjustable Gear Driven Oscillating Sprinkler on Sled Base
27.59