DB TECHNOLOGIES VIO S118R

DB TECHNOLOGIES VIO S118RActive 1x18" Bass Reflex Subwoofer The system's acoustic engine is driven by a Digipro G4 1600W Class D amplifier, equipped with PFC (Power Factor Correction) and SMPS which make the cabinet highly resistant to line voltage fluctuations. Digipro G4 preamplifier features a slot module, equipped with a RDNet expansion card as default, allowing system monitoring and control via Aurora Net. Furthermore, the system is ready for Audinate Dante Expansion

Active 1x18" Bass Reflex Subwoofer

The system's acoustic engine is driven by a Digipro G4® 1600W Class D amplifier, equipped with PFC (Power Factor Correction) and SMPS which make the cabinet highly resistant to line voltage fluctuations.

Digipro G4 preamplifier features a slot module, equipped with a RDNet expansion card as default, allowing system monitoring and control via Aurora Net. Furthermore, the system is ready for Audinate Dante™ Expansion Card allowing integration in a digital audio network.

The amplifier also allows users to run a real-time test on electronics and transducers, both remotely via Aurora Net, or directly on the amplifier module. VIO S118R shows an on-board delay module, allowing to reach a max 62 ms delay via Aurora Net and a max 9.9 ms delay with 0.1 ms steps via on-board rotary.

The on-board cardioid preset processes the backward sub in inverted stack cardioid configurations, to achieve the best possible cancellation on the rear side automatically.

Technical Data

• Speaker Type: Active Bass Reflex Subwoofer

Acoustical Data

• Frequency Response [- 6 dB]: 35 Hz to Cut Freq (X-Over Dependent)
• Frequency Response [- 10 dB]: 32 Hz
• Max SPL: 139 dB
• LF: 1x18"
• Voice Coil LF: 4 "
• Directivity: Omnidirectional

Amplifier

• Amp Technology: Digipro® G4
• Amp Class: Class D
• RMS Power: 1600 W
• Peak Power: 3200 W
• Cooling: Convection + Internal Fan
• Power Supply: Full-range PSU with PFC

Processor

• Controller: DSP 32 Bit
• AD/DA Converter: 24 bit 96 kHz
• Limiter: RMS, Peak, Thermal
• Delay Option:0- 9.9 ms | steps of 0.1 ms [on-board]0 - 62 ms [via RDNet]
• Crossover Frequency LF-HF: Selectable 60-110Hz + Full range
• LF-Xover out slope: 24 dB/Octave

Input

• Signal Input: 1xXLR balanced
• Signal Output:1x XLR balanced (link or X-over)1xRJ45 LINK (RDNet)
• Expansion Card:RDNet Card (1x RJ45 IN 1x RJ45 Link) [included]Dante card [optional]
• Mains Connections:1x PowerCON TRUE1 In1x PowerCON TRUE1 Out
• Controls:1x Input Attenuation Rotary Switch1x Rotary Encoder (Delay 9.9 ms)1x Polarity Inversion Switch (0° or 180°)1x Cardioid Mode Switch1x X-Over Freq Switch (60-110 Hz + Full Range1x System Auto-test

Mechanics

• Housing:Multiplex plywoodPolyurea painted
• Handles:2x Per SideAluminium
• Pole Mount: M20 Thread
• Raincover: Included
• Width: 720 mm (28.34 in)
• Height: 520 mm (20.47 in)
• Depth: 695 mm (27.36 in)
• Weight: 47 kg (103.62 lbs)