Zebralight SC80 220 Lumen AA / CR123A Flashlight

Zebralight SC80 220 Lumen AA / CR123A FlashlightThe Zebralight SC80 is well known for its ability to use either a CR123 battery or an alkaline AA battery without having to use an external body piece. This eliminates the need to carry an extender and also allows the light to produce the same amount of lumens with either battery type. Main Features and Specifications LED: Cree XP G Cool White (norminal CCT 6300K) User Selectable Modes: 3 (High, Medium and Low). Each mode can be configured to one of

The Zebralight SC80 is well known for its ability to use either a CR123 battery or an alkaline AA battery without having to use an external body piece.This eliminates the need to carry an extender and also allows the light to produce the same amount of lumens with either battery type.

Main Features and Specifications

• LED: Cree XP-G Cool White (norminal CCT 6300K)
• User Selectable Modes: 3 (High, Medium and Low). Each mode can be configured to one of the two sub-levels.
• Light Output (OTF, Panasonic CR123A)
  • High:         H1 220 Lm (1.2 hrs)   or    H2  90 Lm (4.2 hrs)/ 126 Lm (3 hrs) / 4Hz Strobe
  • Medium:    M1  40 Lm (10 hrs)    or   M2    12 Lm (28 hrs)
  • Low:         L1     2.5 Lm (4.2 days) or    L2   0.12 Lm (43 days)
• Light Output (OTF, Sanyo 2000mAH Eneloop)
  • High:         H1 200 Lm (0.9 hrs)   or    H2  90 Lm (2.6 hrs)/ 126 Lm (1.9 hrs) / 4Hz Strobe
  • Medium:    M1  40 Lm (7 hrs)    or   M2    12 Lm (23 hrs)
  • Low:         L1     2.5 Lm (3 days) or    L2   0.12 Lm (29 days)
• All 7 levels are current regulated.
• Battery: One CR123A lithium primary or one 1.5V AA (NiMH, lithium or alkaline). Batteries are not included in the package. Unprotected 14500s or 16340s may be used but the performance/runtimes/functions are unknown. Protected 14500s or 16340s may not fit.
• Operating Voltage Range: 0.7V - 4.2V
• Parasitic Drain: negligible (equivalent to 6 years of battery life)
• Beam Type
  
  • 80 degree spill beam spread
  • 9 degree hot spot
• Dimensions
  • Diameter: 0.94 inch (23.9 mm)
  • Length:    3.2 inch (81.6 mm)
• Weight
  • 1.9 oz (55 gram) without battery
• Features
  • Side click electronic soft-touch switch
  • Smart user interface provides fast and easy access to all brightness levels
  • Precision machined casing from premium grade Alcoa aluminum bar stock
  • Durable natural hard anodized finish (Type III Class I)
  • Ultra clear lens with anti-reflection coatings on both sides
  • Orange peel textured reflector
  • Battery power can be locked out by slightly unscrewing the tailcap to prevent unwanted activations or parasitic drain
  • Waterproof to IPX8 (2 meters, 30 minutes)

Operations

This light has 3 main levels (High, Medium, and Low). Each main level can be configured to one of its two sub-levels. The second sub-level of the High can be further configured to different brightness levels or strobes.

• Basic Operation
  • Short click turns on the light to High or turns off the light.
  • Long click (press and hold for about 0.6 seconds) turns on the light to Low.
• Advanced Operation and Configuration 
  • Short click turns on the light to High. Short click again quickly to cycle from High to Medium, and Low.
  • Press and hold to cycle from Low to High, release to set. When press and hold, the light always cycle from Low to High regardless which level you are currently in.
  • Double click to toggle and select between the two sub-levels for that main level. Sub-level selections (except the strobe) for the 3 main levels are memorized after the light is turned off and through battery changes.
  • The second sub-level of the High can be configured after 6 double clicks. Double click (startng with the 7th) to cycle and select different brightness levels or strobes. Short click to turn off the light when finishing configurations. The selections for the second sub-level of the High are memorized after the light is turned off and through battery changes.

 

Accessories in the package

• Removable pocket clip
• 4 o-rings